How To Fix The 4C/4E Error In Samsung Washing Machine Front Load?
4C and 4E codes mostly indicate when you face water supply problems in the washing machine. You may see either 4C or 4E on the display on your washing machine, however both of the codes have the same meaning, and whether you own a front-load or a top load on the display, troubleshooting steps for both of the codes are the same.
6 Causes for the 4C/4E Errors:
Control Board Glitch
The control board manages all the washer’s functions. If there is any glitch in the control board it may be unable to monitor or measure the water level in the washing machine. Resetting the washer should resolve the minor issue to clear 4C/4E error and if you face this error again then you’ll need to troubleshoot this problem with same day washing machine repair service from our team .
Clogged Detergent Dispenser
Don’t regularly use the same detergent we recommend to use high efficiency detergent, sometimes detergent may become clogged with built-up soap residue. A clog may occur due to over flow or not flow properly that’s why 4C/4E error occurs. You may need to use liquid detergent that’s better than detergent water.
Low Water Pressure
Your water pressure reading should fall between 20psi and 120psi. if you are facing low water flowing pressure from the main water supply then surely you will receive error 4C/4E error.
Water tapped not properly Opened
A water supply tap is the manual valve found behind the washing machine. when it is not opened properly and doesn’t get proper water supply then you face error 4C/4E errors in your washing machine.
Kinked or Blocked Water Supply Hoses
Inlet hoses are responsible for transporting water from the home’s main supply to the washer. If the hoses are kinked, blocked, clogged that means they are not connected properly and that’s why we will face a 4C/4E code error.
Clogged Mesh Filter
Error 4C/4E also occurs when we face clogged mesh filters full of dirt or something different that may disturb the water flow. Remove clogged mesh from the filter and if you face this error again after removal then surely you’ll need to have troubleshooting it.
Troubleshoot Error 4C/4E:
First of all check the check the water tap fully turned on.
Next, take a look at the inlet if it’s bent or twisted, straighten it first.
It’s a good idea to clean the water inlet filters.
Lastly, make sure your home’s water pressure is strong enough for your machine.